SoftDroids.net » Windows » Network » Customization » ASUS Firmware Restoration

ASUS Firmware Restoration

0
ASUS Firmware Restoration
Download
Category: Customization
System: Windows XP, Vista, 7, 8.1, 10
Program Status: Free
Looking at the file: 4 845

Description

This application is required for those who use Asus routers. This utility is required to install new software on them. ASUS Firmware Restoration - this is a small program that will be required to carry out emergency reflashing of various routers that are produced by asus. In general, in this regard, Asus products are very thoughtful. In the firmware is initially laid various protective mechanisms that download the necessary software for recovery. But sometimes it may be necessary to perform an emergency re-flashing. Such procedures may be required if the router has a failure. For example, if it was updating the firmware, and at this point the power was cut off, or the connection to the network was lost. In this case, you need to solve the problem. And to solve it, you need to download the software yourself.

Working with ASUS Firmware Restoration

Working with this program is quite easy. You just need to install it and download the official firmware from Asus. It can be found in free access. After launching the utility, you will be able to see a small window. In this window, you need to specify the path to the firmware. The program reads only files with ROM resolution. This means that you will have to unzip the files first and then proceed with the installation. After specifying the installation path, click on the "download" button. After the download is complete, the router will start working normally again. This program can also install custom firmware. Such firmware can improve the router's performance a bit, but it should only be installed by experienced users. If you are not very well versed in such technologies, then trying to install custom firmware can simply kill the device.

Features of work

Before you start installing a new firmware, it is worth learning about some features. First of all, you need to understand that the router needs to be connected to the computer. This should be done with the help of an Ethernet cable. In the router you need to insert the same cable, only in the WAN port. After performing the reflashing, be sure to reset the settings of the network adapter. They should be standard.

Key features

  • Performs emergency firmware recovery for asus routers;
  • Works not only with official firmware, but also with custom firmware;
  • Simple and clear interface;
  • Need a little work with the router settings;
  • Distributed free of charge.
Screenshots
Comments (0)
Commenting
Comment
Copying of any of our materials is FORBIDDEN!
Feedback
Copyright 2024