RockChip Batch Tool

RockChip Batch Tool is a program that does not require installation, because it can work in portable mode. It is designed to download new firmware for mobile devices powered by RockChip chip. This utility is mainly intended for tablets. Distributed completely free of charge. Most often such add-ons are used in mobile devices from such manufacturers: ONDA, Explay, Ritmix. In general, these are cheap devices that can be bought in Russia, and the real manufacturer is in China. For the re-flashing process, you will need a USB cable and sometimes an additional installation of drivers.

How to use

The RockChip Batch Tool application will not be difficult to figure out. To install an update on the device, you need to connect the tablet to your computer via USB cable and download the IMG firmware file, which can be easily found on the Internet. It is important that during the installation of updates, the device remains turned on. Otherwise, it can harm the gadget. Now, you have to specify the path to the image in the FW part. If everything goes well, the bottom indicator, located under the number "1", will be lit green. If it doesn't, then you should check if the appropriate drivers are installed and if the tablet is connected to the computer. After the green light appears, you can start the update process by pressing the "Update" button and waiting for the installation to complete. It should not take more than 5 minutes, during this time the gadget should be rebooted. Despite the fact that the application is quite simple, it is not recommended to use it for inexperienced users.

Advantages and disadvantages

On the plus side, it is worth noting that RockChip Batch Tool has Russian language. Also, the application does not need to be installed on a computer, it is able to work in portable mode. Anyone can download the program without paying a penny. But here are the disadvantages, there is that RockChip Batch Tool may not work with the operating system Windows new versions.

Main features

• RockChip Batch Tool is designed to update firmware on mobile devices.
• You will need to connect to your computer via USB cable for the update.
• Clear menu.
• May not work on newer versions of Windows operating systems.
• Works only with IMG images.
• Not recommended for beginners.